Browse all practice questions for the Manor Preboards Module 5 Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Manor Preboards Module 5 Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Glucocorticoids affect glucose metabolism and immune function. Which best describes their effect?
  • The following steps may be done during manufacturing in order to prevent logo infilling: I. Minimize foam generation during preparation of coating suspension. II. Reduce atomizing conditions and/or reduce drying conditions to minimize risk of spray drying. III. Improve drying (reduce spray rate or increase temperatures) to offset overwetting. IV. Increase pan speed to minimize dwell time in spray zone.
  • In suspected MRSA infection, what is the general approach to antibiotic choice?
  • Which diuretic class inhibits NaCl reabsorption in the distal tubule?
  • Which statement correctly distinguishes bactericidal from bacteriostatic antibiotics?
  • What is the therapeutic use of acetaminophen and its major risk at high doses?
  • Which excipient is not typically used to impart compression characteristics to tablet formulation?
  • In a case where a patient purchases maintenance drugs with a prescription, booklet, and ID, which law is being violated?
  • Excessive use of binders affects which of the following tablet characteristics?
  • Which coating results in a thin polymer film forming a skin-like layer on the tablet surface?
  • What Liso value is used for uni-univalent electrolytes in isotonicity calculations?
  • The constant 111.11 in the equations for the second method represents which quantity?
  • Which coating is applied as a concentrated sugar solution to improve compliance and mask tastes and odors?
  • What is heparin's mechanism of action and how is its effect monitored?
  • Which granulation process involves melting solids and reducing them to beads or powder by spraying the molten feed into a stream of air or other gas?
  • Which component governs the motion path of the punches?
  • Testosterone patch can be applied to the following skin sites: select the classification.
  • How do monoclonal antibodies work as therapeutics and give an example?
  • The system consisting of a drug core and an osmotically active substance surrounded by a semipermeable membrane with a laser-drilled orifice for drug exit is called:
  • Which statement best describes the primary use of liniments?
  • Which size reduction law states that the size reduction is directly proportional to the new surface formed?
  • Methylphenidate (Daytrana) transdermal drug delivery system can be applied to the following skin site:
  • Coalescence of oil globules in an oil-in-water emulsion is called?
  • Which component is primarily involved in confinement and shaping of the tablet during compression?
  • What is the mechanism of action of metformin in type 2 diabetes?
  • Which component directly performs the compression of powder within the tableting assembly?
  • Why is rifampin a potent inducer of liver enzymes and what is a common drug interaction?
  • Which component holds granules prior to compression?
  • Which granulation process uses a sufficient volume of hot air to evaporate and dry liquid droplets and can be used in encapsulation?
  • What is the effect of aspirin on platelets and its clinical use?
  • Which statement best describes the mechanism of action of angiotensin II receptor blockers (ARBs)?
  • In Sprowl's method, the E value is fixed at what value?
  • Absorbed Film and Interfacial Tension Theory describes the role of a film at the interface in stabilizing emulsions. Which statement best reflects this theory?
  • Which class is an example of time-dependent antibiotics?
  • Which component guides the punches during their movement in the compression cycle?
  • What is the role of P-glycoprotein in pharmacology?
  • The following excipients impart satisfactory compression characteristics to tablet formulation except:
  • In which scenario is NSAID-induced reduction in renal perfusion least likely to occur?
  • Which granulation method forms a wet mass by adding a binder and then dries after sieving?
  • Which combination of sealing methods is used to seal ampoules?
  • Area whose air is filtered by a HEPA filter is considered to be what class of clean room?
  • Which statement correctly describes the location of the drug in a reservoir-type patch?
  • Which statement about Class II Methods is correct?
  • Running powder consists of:
  • The Food and Drug Administration was formerly named the Bureau of Food and Drugs. Which law is cited?
  • The following are examples of machines used in large-scale mixing in Wet Granulation EXCEPT:
  • Which statement best describes the difference between time-dependent and concentration-dependent antibiotics?
  • The following types of lactose has the disadvantage of undergoing Maillard reaction of reaction with amine drugs and alkaline lubricants, EXCEPT:
  • FD&C Red 3 is associated with which colorant?
  • Part of a tableting machine in which granules for compression are stored.
  • Which granulation method is characterized by creating a cohesive mass that is then blended and dried after passing through sieves?
  • The term 'impalpable' refer to a substance that is
  • What is the primary action of statins and a major adverse effect to monitor?
  • Catapres® patch is an example of which transdermal patch type?
  • Name two common adverse effects of loop diuretics.
  • Rifampin commonly interacts with oral contraceptives by causing what effect?
  • A near saturated solution of sucrose in water is called:
  • In selecting the ointment base, which factor is NOT typically considered?
  • Methylphenidate patch can be applied to the following skin sites: select the classification.
  • For MRSA pneumonia, which agent is commonly preferred due to excellent lung penetration and safety profile?
  • Clonidine patch can be applied to the following skin sites: select the classification.
  • Which method is an example of Class II isotonicity adjustment?
  • Excessive use of binders can affect which tablet properties?
  • Which statement about Class II methods is true?
  • Which action specifically helps minimize dwell time in the spray zone when preventing Film Cracking Type 2?
  • Which tablet coating is made from the hydrolysis product of collagen and helps with swallowing while preventing counterfeiting?
  • FD&C Yellow 6 is associated with which colorant?
  • This defect is associated with exposure of tablet cores to coating process conditions rather than the coating itself.
  • In a patient with peptic ulcer disease, which analgesic is generally preferred and why?
  • Which statement best differentiates potency from efficacy?
  • Ostwald ripening destabilizes particle growth due to fluctuations in which storage parameter(s)?
  • Which term describes a near-saturated sugar solution in water used in pharmaceutical formulations?
  • To change the final tablet silhouette, which part would you adjust?
  • In preventing tablet breakage, how many of the following statements are correct?
  • Extraction by macerating crude drug in either cold or hot water for a short period of time is called which?
  • Scopolamine patch can be applied to the following skin sites: select the classification of these sites.
  • Surface Tension Theory explains how emulsifiers lower interfacial tension and promote droplet breakup. Which statement best reflects this theory?
  • Regarding Transdermal Delivery Systems, how many of the following statements are correct?
  • D&C Yellow 10 is a color additive that corresponds to which color?
  • Which statement best differentiates irreversible enzyme inhibitors from reversible inhibitors in pharmacology?
  • Which adverse effect is most commonly associated with aminoglycosides?
  • What is a common adverse effect of long-term corticosteroid use?
  • Which antibiotic is commonly considered bacteriostatic?
  • What is the action of a competitive antagonist at a receptor, and how can its effect be overcome? Example: flumazenil.
  • Regarding percutaneous absorption of drugs from transdermal patches, which of the following statements are true?
  • Which statement correctly describes the mechanism of proton pump inhibitors?
  • What is the mechanism of action of ACE inhibitors?
  • Which statement best describes the action of competitive antagonists at receptors?
  • If roughness is caused by overwetting, which adjustment helps?
  • Which statement best defines an adverse drug reaction?
  • Core swelling due to excessive moisture uptake during coating application leads to which defect?
  • Which statement about liposomes is NOT true?
  • How does atropine affect heart rate and its clinical use?
  • Which statement best describes the role of alpha-adrenergic antagonists in treating hypertension and benign prostatic hyperplasia, with doxazosin as an example?
  • A common side effect of ACE inhibitors and how is it managed?
  • In preventing tablet twinning, how many of the following statements are correct?
  • Spans and Tweens are considered:
  • Part of a tableting machine which determines the shape and size of the tablet.
  • Which granulation method is the cheapest and involves slugging followed by milling and screening?
  • The component that sets tablet dimensions by defining the cavity used in compression is which?
  • Which statement best describes the mechanism of action of aminoglycosides and a key toxicity?
  • In matrix-type transdermal DDS, how many of the following statements are correct?
  • In preventing logo bridging, how many of the following statements are correct?
  • Part of a tableting machine which compresses the powder/granules for tableting into the die cavity to form the desired tablet.
  • Which tablet type is described as a dry coated tablet with two parts: an internal core and surrounding coat?
  • Which organ is most directly influenced by P-glycoprotein activity in drug absorption and distribution?
  • HEPA filters are used for filtration of which medium?
  • Liniments may be liquid or semi-solid in nature. Which statement best reflects this?
  • Which statement best describes the factors that influence drug distribution and the term that describes the volume in which a drug distributes?
  • Which statement best describes the effect of broad-spectrum antibiotics on resistance risk?
  • Red man syndrome is most commonly associated with which antibiotic, particularly with rapid intravenous infusion?
  • What is the mechanism of action of vancomycin and a major toxicity concern?
  • How do NSAIDs affect renal perfusion and prostaglandin synthesis?
  • In preventing tablet core erosion, how many of the following statements are correct?
  • The following steps may be done during manufacturing in order to prevent Film Cracking (Type 1): I. Reduce processing temperatures to minimize core thermal expansion. II. Reduce drying conditions (or increase spray rate) so that some moisture retention in the coating occurs due to augment plasticization effects (thus increasing film flexibility) III. Improve drying (reduce spray rate or increase temperatures) to offset overwetting. IV. Increase pan speed to minimize dwell time in spray zone.
  • Differentiate between adverse drug reaction and side effect.
  • Part of a tableting machine which guides the movement of tableting punches.
  • What is the most common method for tableting active ingredients that are chemically incompatible?
  • What is the mechanism of action of beta-lactam antibiotics?
  • What is the first-line drug for the management of anaphylaxis?
  • In beta-blocker overdose, which of the following best describes the typical clinical picture and a standard component of its management?
  • Which coating provides delayed release by resisting gastric fluid and dissolving in the intestine?
  • The following steps may be done during manufacturing in order to prevent delayed dissolution for immediate release products: I. Adjust process conditions to facilitate reduction in processing temperatures. II. Use high solids system to enable use of low processing temperature. III. Improve drying (reduce spray rate or increase temperatures) to offset overwetting. IV. Increase pan speed to minimize dwell time in spray zone
  • Which granulation process involves the formation of spherical particles from wet granulation?
  • A pharmacist dispenses Valium to a customer who forgot her prescription. Which law is violated?
  • Which tablet form consists of an internal core surrounded by a coating in a dry coating process?
  • If roughness is caused by partial spray drying, which adjustment helps minimize this effect?
  • The component that stores feed material before compression is called which?
  • Which of the following is a major adverse effect to monitor with statin therapy?
  • Regarding mechanical mixers for emulsions, which statement is most accurate?
  • The most commonly used diluent in powders for capsules
  • How does calcitriol affect calcium homeostasis?
  • Testosterone (Androderm) transdermal drug delivery system can be applied to the following skin site:
  • Warfarin inhibits which enzyme as part of its anticoagulant effect?
  • ACE inhibitors cough mechanism: The cough is primarily due to accumulation of which peptide?
  • Determining Isotonicity Value involves several statements about hemolytic testing and freezing point methods. Which option is correct?
  • Which statement accurately describes how monoclonal antibodies function as therapies, with rituximab as an example?
  • What is first-pass metabolism and its clinical consequence for oral drugs?
  • What is the difference between short-acting and long-acting inhaled beta-agonists in asthma therapy?
  • To prevent logo infilling, which statements are correct?
  • The equation for compaction is also known as which?
  • Which adverse outcome is a known risk of aspirin use due to COX-1 inhibition?
  • Which size reduction law states that the work used to reduce the particle size is proportional to the square root of diameter of particle produced?
  • D&C Red 28 is most closely associated with which pigment name?
  • Which process is an air-fluidized technique used to coat tablets and then granulate and dry them?
  • This defect is a result of partial spray drying or overwetting.
  • Which method is an example of Class I isotonicity adjustment?
  • Scopolamine (Transderm Scop) transdermal drug delivery system can be applied to the following skin site:
  • Long-term use of proton pump inhibitors has been associated with which risk?
  • What is the therapeutic serum range for digoxin and what monitoring parameter guides dosing?
  • Which electrolyte disturbance is commonly associated with loop diuretics?
  • Which statement about liposomes is NOT true?
  • During a rabies outbreak, a vaccine manufacturer stops selling its product without informing the FDA. Which law is violated?
  • cGMP stands for which of the following?
  • Which action reduces moisture burden on the drying process during coating?
  • A provincial hospital director announces a policy to reduce the hiring of female employees. Which law is implicated?
  • Name a drug that can cause serotonin syndrome when combined with SSRIs and explain its mechanism.
  • FD&C Yellow 6 is also known commercially as which color?
  • Nicotine (Nicoderm) transdermal drug delivery system can be applied to the following skin site:
  • FD&C Red 3 is associated with which colorant?
  • In adhesive-type transdermal DDS, how many of the following statements are correct?
  • In dry granulation, what term describes the large compressed particles produced before milling?
  • In percolation for syrups, the percolator design near the lower orifice should be which shape?
  • How do thiazide diuretics help treat hypertension, and what is a common electrolyte disturbance?
  • Which size reduction law states that the work required to reduce the size of a given quantity of material is constant for the same reduction ratio regardless of initial size?
  • Partial spray drying within the logo causes which defect?
  • Film Cracking Type 1 in pharmaceutical film coating is caused by what factors?
  • Which antibiotic is a bacteriostatic protein synthesis inhibitor that binds the 50S ribosomal subunit?
  • What is boric oxide responsible for in Type II glass?
  • Which statement best describes warfarin's mechanism of action?
  • Extraction by macerating crude drug in gentle heat is called which?
  • Which statement about first-pass metabolism is true?
  • Class I Methods: Which statement is correct regarding isotonicity adjustment methods?
  • Which statement about reservoir-type transdermal patches is true?
  • Which statement best describes a matrix-type patch?
  • FD&C Red 40 colorant is which option in the following list?
  • Which statement best describes the major safety differences between SSRIs and TCAs as antidepressants?
  • Which of the following statements about liniments is correct?
  • Percolation is a method of preparing syrups which involves passing distilled water or medicated component slowly through a bed of sucrose. Which of the following are correct?
  • Which method is specifically cited as a variation of the dry gum method for emulsions containing volatile oils?
  • Which part is responsible for pressing the powder into the die cavity to form a tablet?
  • Which method is a variation of the dry gum method for emulsions containing volatile oils?
  • In the White Vincent Method, the diluting vehicle must be isotonic.
  • Which statement best describes Sodium Chloride Equivalent (E) in isotonicity calculations?
  • In isotonicity, which statement about Class I and Class II adjustment methods is correct?
  • Electric Double Layer Theory describes the charge arrangement around an emulsion droplet and its impact on stability. Which statement best reflects this theory?
  • Which component acts as the receptacle for granules before they are pressed?
  • Which statement about liposomes is NOT true?
  • Oriented Wedge Theory describes how emulsifying agents orient around droplets based on solubility. Which statement best reflects this theory?
  • Which cytochrome P450 isoenzyme metabolizes warfarin most significantly?
  • FD&C Red 40 is commonly known as which colorant?
  • Which antibiotic class is commonly associated with nephrotoxicity and ototoxicity?
  • What is the role of alpha-adrenergic antagonists in hypertension or benign prostatic hyperplasia?
  • Minimum effective velocity of a HEPA filter is:
  • Which antibiotic is bactericidal?
  • Which extraction method involves exposing solid ingredients to a prescribed solvent for about three days with frequent agitation?
  • The following steps may be done during manufacturing in order to prevent Film Cracking (Type 2): I. Improve drying (reduce spray rate or increase temperatures) to offset overwetting. II. Increase pan speed to minimize dwell time in spray zone. III. Use high solids coating systems to reduce moisture burden on drying process. IV. Reduce processing temperatures to minimize core thermal expansion.
  • Which granulation method uses an air suspension technique to coat and dry particles and granules?
  • Which best describes the mechanism of action of proton pump inhibitors and a common adverse effect?
  • What is pharmacovigilance and why is it important?
  • Describe the mechanism of action of proton pump inhibitors.
  • Duragesic® is an example of which transdermal patch type?
  • Sealing of ampoule is performed by which method(s)?
  • What is the mechanism of loop diuretics and their clinical use in heart failure?
  • Which coating type is primarily used to mask tastes and odors and improve stability by layering sugar?
  • How does insulin differ from oral hypoglycemic agents in mechanism?
  • In reservoir-type transdermal DDS, how many of the following statements are correct?
  • In preventing edge chipping, how many of the following statements are correct?
  • Spansules are capsules containing medicines in granules coated to release drug at different times.
  • Explain the concept of drug half-life and its relevance to steady-state dosing.
  • Capsules containing medicines (in the form of granules) coated with slow-dissolving materials to release at different times are called:
  • The component that stores feed material before compression is called which?
  • Which statement about glass types is correct?
  • Which system is also known as a monolith, where the drug is homogeneously dispersed in a rate-controlling medium?
  • Why are non-selective beta-blockers contraindicated in severe asthma?
  • The following steps may be done during manufacturing in order to prevent rough coatings: I. If roughness is caused by partial spray drying, reduce atomizing conditions and/or reduce drying conditions to minimize this effect. II. Reduce coating solids if viscosity is too high for effective atomization. III. If roughness is caused by overwetting, improve drying conditions in the process. IV. Increase solids content to decrease viscosity.
  • Metformin, when used as monotherapy in type 2 diabetes, is unlikely to cause hypoglycemia.
  • Which extraction method involves boiling in water for 15 minutes, cooling, straining, and making up to volume with water?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy